Lab 5.2.3.3 Designing the Core Layer

Step 1: Identify Core Layer Requirements
a. Use word processing software to create a new document called “Core Layer Diagram.”
b. Use the identified topology and associated equipment to determine Core Layer design requirements.
Design requirements for the Core Layer network include:
High-speed connectivity to the Distribution Layer switches
24 x 7 availability
Routed interconnections between Core devices
High-speed redundant links between Core switches and between the Core and Distribution Layer
devices
c. Brainstorm with other students to identify areas that may have been missed in the initial requirements
document.

Step 2: Create an Access Layer module design
Using the list developed from the group discussion, create an Access Layer module (design only).
a. Create your design using the existing equipment.
The FilmCompany network equipment includes:
2 x 1841 Routers (FC-CPE-1, FC-CPE-2)
3 x 2960 Switches (FC-ASW-1, FC-ASW-2, ProductionSW)
1 x ADSL Modem for Internet Access
b. Using the list of equipment, identify modules that can be added to the existing equipment to support
new features, such as redundancy.
c. Save your Core Layer Diagram document.
Step 3: Select Core Layer devices
a. Use word processing software to create an addition to the Core Layer Diagram document.
b. The identified Core Layer module diagram will be used to adjust the Distribution Layer design.
Equipment selected must include existing equipment. Use Layer 3 devices at the Core Layer in a redundant configuration.
c. Save your Core Layer Diagram document.

Step 4: Design Redundancy
a. Use word processing software to create an addition to the Core Layer Diagram document.
b. Design a redundancy plan that combines multiple Layer 3 links to increase available bandwidth.
c. Create a design that incorporates redundancy
d. Save your Core Layer Diagram document.

Step 5: Reflection / Challenge
The design strategies for the FilmCompany pose many challenges for the designer. What were a few of the more difficult challenges you encountered?
Consider and discuss the identified strategies. Do all of the strategies designed accomplish the task the same way?
Would one be less expensive or less time-consuming than the other?
• Apakah peralatan yang ada mampu menangani lalu lintas jaringan yang diusulkan? Jika demikian, bagaimana? Jika tidak, mengapa?
• Apa perangkat yang dapat digunakan sebagai pengganti Layer 3 switch? Dapatkah perangkat tersebut memberikan kinerja yang sama?
• Apa kelemahan potensial untuk diagram yang diusulkan?

Komentar

Postingan populer dari blog ini

Lab 4.2.5.5 Calculating a VLSM Addressing Scheme

Lab 5.2.3 Configuring RIPv2 with VLSM, and Default Route Propagation

Lab 7.3.3 Configuring and Testing the Rapid Spanning Tree Prototype