Chapter 9

Lab 9.2.7


Step 1 : Build the network and configure the hosts


Step 2 : Record the baseline IP address information for computers and intergrated router


a. IP address : 192.168.1.2
   Subnet mask : 255.255.255.0
   Default gateway : 192.168.1.1
   DNS :
   DHCP :
  
b. Internal IP address : 192.168.1.3
    Subnet mask : 255.255.255.0
    Enabled.
    External (internet) IP address : 10.1.1.5
    Subnet mask : 255.0.0.0
    Default gateway IP address : 10.1.1.1
    DNS server :

c.IP address : 192.168.2.2
   Subnet mask : 255.255.255.0
   Default gateway :  192.168.2.1
   Web server 1 protocol and name : 
   Web server 2 protocol and name :
    FTP server 1 protocol and name :
    FTP server 2 protocol and name :

Step 3, 4, 5, 6, 7, 8

Masalah yang biasanya terjadi yaitu masalah routing.
Perintah - perintah yang bisa digunakan untuk menyelesaikan masalah ini :
- show ip route, untuk mengeluarkan isi dari tabel routing. Contoh nya : 
     ~ show ip route connected,
     ~ ip default network.
     ~ show ip route database
     ~ show ip route protocols
     ~ show ip route address
- Lakukan perintah ping dan telnet.
- Gunakan teknik top-down, bottom-up, dan divide and conquer.

Step 9 : Refelection

a. Divide and conquer.

b. Divide and conquer

Komentar

Posting Komentar

Postingan populer dari blog ini

Lab 5.2.3 Configuring RIPv2 with VLSM, and Default Route Propagation

Step 1: Connect the equipment. a. Connect Router3 to Router1 and Router2 with serial cables. b. Connect Router1’s Fa0/0 interface with a straight-through cable to Switch1’s Fa0/1 interface. c. Connect Router2’s Fa0/0 interface with a straight-through cable to Switch2’s Fa0/1 interface d. Connect PC1 to Switch1 and PC2 to Switch 2 with straight-through cables. e. Connect PC3 to Router3’s Fa0/0 interface with a crossover cable. f. Connect a PC with a console cable to perform configurations on the routers and switches. Step 2: Perform basic configurations on the routers. a. Establish a console session with Router1 and configure hostname, passwords, and interfaces as described in the table. Save the configuration. b. Establish a console session with Router2 and perform a similar configuration, using the addresses and other information from the table. Save the configuration. c. Establish a console session with Router3. Configure hostname, passwords, and interfaces according to the table. ...
Baca selengkapnya

Lab 6.2.1 Observing DNS Name Resolution

Step 1: Observe DNS conversion   a. Click the Start button, select Run , type cmd, and then click OK . The command prompt window appears.   b. At the command prompt, type ping www.cisco.com . The computer needs to translate www.cisco.com into an IP address so it knows where to send the Internet Control Message Protocol (ICMP) packets. Ping is a type of ICMP packet.   c. The first line of the output shows www.cisco.com converted to an IP address by DNS. You should be able to see the effect of DNS even if your school has a firewall that prevents pinging, or if Cisco has prevented people from pinging their web server.   d. Which IP address is shown on the screen ? Jawaban : 60.254.176.170   e. Is it the same as the one shown in the figure? Why do you think this occurred? Jawaban : Ya. www.cisco.com adalah domain name systemnya sedangkan 60.254.176.170 adalah alamat fisiknya .   f. Work together with another student and disc...
Baca selengkapnya

Lab 4.2.5.5 Calculating a VLSM Addressing Scheme

Langkah 1: Memeriksa persyaratan jaringan Gunakan diagram topologi untuk menentukan jawaban atas pertanyaan di bawah ini. Ingat bahwa alamat IP akan  diperlukan untuk setiap LAN dan WAN interface. Berapa banyak subnet yang dibutuhkan?  Jawaban: 7 Berapa jumlah maksimum alamat IP yang dibutuhkan untuk satu subnet tunggal ? Jawaban: 55 Berapa banyak host alamat IP yang dibutuhkan untuk LAN terbesar?  Jawaban: 26 Berapa banyak host alamat IP yang diperlukan untuk LAN berikutnya terbesar? Jawaban: 20 Berapa banyak host alamat IP yang dibutuhkan untuk LAN terkecil?  Jawaban: 12 Berapa banyak host alamat IP yang dibutuhkan untuk setiap link WAN?  Jawaban: 2 masing masing, dengan total 6 Berapa jumlah total alamat IP host yang diperlukan untuk jaringan ini?  Jawaban: 119 Berapa jumlah total alamat IP host yang tersedia dalam jaringan 192.168.1.0/24? Jawaban:  254 Jika jaringan adalah subnetted untuk memberikan 7 subnet digunakan, bisa mengatasi persya...
Baca selengkapnya